Category

How-To

Handmade Animal Magnet Tutorial

I recently attended the wedding of my childhood neighbor (Congrats Kayla & Steve!).  I truly enjoy going to a wedding or event that has every little detail thought out and presented in a unique way and this couple did not disappoint.  The theme was whimsical woodlands meets fairytale love story.  They did an amazing job and their wedding was really a true representation of their personal style.

One of my favorite details of the wedding was the seat card holders for the guests.  Each seat card was displayed upright in between a mini animal toy figurine which was cut in half with a magnet attached on the inside of each end.  I guess my kids found these little figurines just as enjoyable as I did since I woke the following morning to a screaming match over whose new toy it was. Since I only had one to spare, the only solution was to make my weekly trip to Michael’s a little early and get the supplies needed to re-create these little woodland gems.

Here’s what you need:

  • Plastic mini animal toy figurines (I got mine at Michael’s)
  • Sharp knife
  • Fine sand paper
  • Non-toxic paint or spray paint
  • Magnets
  • Clear glue (I used gorilla glue as well as hot glue to really secure in place)

Picture 1

Step 1:

Picture 2Take the plastic animal of your choice and vertically cut the animal in half.  If you notice that the edges of your animal are a little rough after the cut, take a fine grain sand paper and sand the edges so that they are nice and smooth.

Animals with magnetsStep 2:

Connect 2 of your magnets together (its easier to work with them already connected first).  Take your gorilla glue and dab a little on one end of your magnet as well as a little on the flat side of the animal.  Hold the magnet in place on the animal until dry (30 seconds – 1 minute).  Repeat this step on the other half of your animal.

Step 3:

Start hand painting or spray painting both sides of your animal and let it dry completely before moving to the next step.

Step 4:

Animal Seat Card HoldersOnce the paint has dried on your animals, use a glue gun to seal around the edges of the magnet.  This adds some extra adhesive to make sure that your magnets stay in place.  Once the glue has dried, your magnets are ready to use.

This is a quick project that will add some whimsical fun to your home or next event.  The magnets are a unique idea for seat cards at your next dinner party, a perfect way to display photos or décor for a birthday and they also look great on the fridge (just in time for all the lovely artwork your kiddies will bring home from school).

Animal Magnet Card HoldersTry this project next time you are stuck in the house with your kids on a rainy day.  Complete steps 1 and 2 on your own and then let your kids use their creativity to paint the animals the colors of their choice.  It is a great way to educate your children on their animals or dinosaurs, they get to explore their creative minds with some crossbred species of animals and you will have some pretty cool magnets to hang all their beautiful artwork with.  Picture 8

Just one wedding guest who appreciates the little details that make a stylish wedding, Thia 

Share your kids creative animal masterpieces with us via Facebook: Amazing Matriarch, Instagram: amazingamtriarch or Twitter: @AMatriarch;  Tag us on social using#amazingmatriarch

Handmade American Flag Lanterns Perfect for July 4th

 

With 4th of July rapidly approaching I wanted to create some red, white and blue party décor that I could use at our family celebration this weekend.   I headed over to Michaels Art & Crafts and after a little while cruising the aisles hoping to find some inspiration for my decor, I came across some jumbo sized mason jars.  This particular brand, Ball, is made in the USA and I thought they would make a great base for party lanterns.  I knew I needed an American flag displayed somewhere at our celebration, so I decided to paint the stars and stripes on the jars to create handmade American Flag lanterns.

This project was very simple to craft and the added bonus was the wallet friendly cost at the end!  Follow our easy steps to create your own American Flag inspired lanterns.

Here’s what you need:

  • 3 Mason Jars (any size will do)
  • Painter’s Tape
  • Paint for Glass (I used Annie Sloan Chalk Paint)
  • Circular Foam Brush
  • A Mini Star Lever Punch
  • Rope (a thin size for the base of the Mason Jar and a thicker size for the handle)
  • Clear Glue
  • 3 Candles (make sure these will fit into the nape of your jar)
  • Sand (optional)

Step 1:

Clean the outside of the mason jars with a damp cloth to remove any dust or dirt on the surface before you begin painting.  Let them dry completely.

Step 2:

Once the jars are dry to the touch, you can begin placing your painters tape.  Since I had blue and red paint, I placed the tape where I wanted the white sections to be.  I took the lever punch and started punching little stars into the painters tape and placed each star on the jar one at a time so they were evenly spread out all around the surface.  I then started placing the stripes down on the other 2 jars making sure they lined up but also eyeballing it as I went.  Rub your finger over all the tape to ensure it is securely in place.

Step 3:

Start painting the blue paint onto the jar with the stars and the red paint onto the jars with the stripes.

**Note** – I ended up using a circular foam brush to apply the paint because on my first try with a brush all you could see where the brush strokes when I was finished.  I switched to the circular foam brush and applied the paint in a dabbing motion and this presented a more smooth finish when the paint dried.

Let the first coat of paint dry completely.  Annie Sloan Chalk Paint dries really quickly, so that was ideal for me to complete this project in an hour and a half.

Step 4:

Once your first coat of paint is completely dry, you can then apply your second coat.  Let your second coat of paint dry completely.

Step 5:

Once the paint is dry, remove the painters tape.  You may need to clean up the edges of your lines a bit in case any paint bled under the tape.  I used a cotton swab for this process.

Step 6:

Use a sealer to place over your jars so that the paint that you applied will stand the test of time.  Let the sealer dry completely.

Step 7:

Now that your sealer is dry, you can start adding the rope to the nape of your jars.  I used a hot glue gun with clear glue to secure the rope in place.  Begin with one layer of the thinner sized rope for the bottom of the jar neck to the top stopping along the way to secure with glue.  Next cut a small handle (or large depending on your preference) out of the thicker sized rope and glue each side of the handle to the mason jar.  Finish with one more layer of the thinner sized rope over the handles.  Repeat this step for the rest of the mason jars.

This American inspired party décor is an inexpensive way to put a unique twist on your celebration and it will last for many years to come.

– Just one proud American whose heart beats true for the red, white and blue, Thia

Share your July 4th party decor with us via Facebook: Amazing Matriarch, Instagram: amazingamtriarch or Twitter: @AMatriarch;  Tag us on social using#amazingmatriarch

Simple Hair Tutorial for the Waterfall Ponytail with a Twist

Part 3 in a 6 part series

Amazing Matriarch teamed up with Moselle Sath, creative hairstylist at Shag Boston, to help create some amazing hair styles that are easy to achieve for women that are always on the go.

The Waterfall Ponytail Twist

The waterfall ponytail with a twist is exactly how it sounds.  A fun take on the ever classic ponytail, this style will add a little flavor to your normal hairstyle routine.  Our 5 minute tutorial will break down how to create a topsy tail (remember those?) without the actual hair tool that our mothers used.  Perfect for those of us that require a little extra sleep in the am or just don’t have any spare time with the stressful morning rush.  This style is so easy that you can create it in the car while you are stopped at a stoplight.  You will end up with a fresh new look to sport in the office or at school drop off and no one will realize how little effort it took.

What you need:

  • 3 clear elastics (or more, depending on how many ponytails you want to create)
  • Comb

Step 1:

Gather a small section of hair from each side of your head to create a half up ponytail and secure with an elastic on the back of your head.  Note – you want the elastic to hold your hair in place but you also want to leave it a little loose.

Step 2:

Create a part in your hair just above the elastic to make an opening for your ponytail.  Next you want to lift your ponytail up through the opening you created above the elastic in your hair.  Pull your ponytail through the front opening down through the back.  Make sure you pull the entire ponytail through.

Step 3:

Push your elastic up into the twisted tail to secure tightly in place.

Step 4:

Now you want to gather a small section of hair that is still hanging to create a second ponytail.  Make sure to include the ponytail from the first section in this second ponytail.  Repeat steps 2 & 3 until you have created 2 twisted tails.

Step 5:

Repeat these steps for as many twisted tails as you want to create.  3 is a great number to use as a guide. Keep in mind to always include the ponytail from the previous tail to ensure a uniform look for your end product.

In 5 minutes or less, you have added a nice twist to your classic ponytail and you are ready to take on the day.  Have a little extra time?  Take this hairstyle a step further and add a regular or fishtail braid to the final ponytail.

– Just one snooze button addict sharing a quick twist for your morning hair, Thia

Try this look on you and your mini me!  Share your takes on this style with us via Facebook: Amazing Matriarch, Instagram: amazingamtriarch or Twitter: @AMatriarch;  Tag us on social using#amazingmatriarch

%d bloggers like this: